Dana Point Ocean Institute Updates the Community on the Status of the salvage of the Pilgrim Tall Ship on Friday April 10 2020.
The historic Tall Ship Pilgrim, keeled overnight on March 29 2020.
Dan Goldbacher, Director of Maritime Programs at The Ocean Institute updated the Community in an Online Video message about the status of the Pilgrim on Friday April 10 2020.
Goldbacher described what is happening now, “The Salvage Crew is using the Crane to help remove the Vessel. They are doing a great job at being able to remove different pieces of the Ship.”
Dan Goldbacher explained that, “We have had a lot of people asking about memorabilia.
What we are going to do with different pieces that we have been able to salvage.
Things like the Bell, the Hull, The Mast including All the Yards which is great.”
Goldbacher reminded the Community that “We are going to keep everybody in the loop as we progress thru that.”
Goldbacher explained that in the future, “We are going to get a team together to decide what we are going to use different pieces for.”
“If we are going to use them in the future, use them as memorabilia as museum pieces.”
Ocean Institute April 10 2020 Update on the Pilgrim Tall Ship
It’s All in the Details!
Rigging of the Tall Ship Pilgrim, a 118’ wood hull sailing vessel, for the purpose of lifting the vessel above its gunnels in preparation for dewatering and transporting the vessel by tow to San Diego Shipyard.
Current Position of vessel:
On March 30, 2020 during a 0.7 low tide, the vessel was in 10 feet of water.
The vessel is on the bottom and leaning.
The vessel is in the Dana Point Harbor in Dana Point, California.
Utilize the Crane Barge DB Salta Verde to perform minimal “picks” to raise the Pilgrim’s deck approximately 1.5 feet above water to dewater the vessel.
Divers will position straps for the picks.
Once the vessel is raised, the vessel will be dewatered and inspected.
Upon inspection, if the vessel can be “patched” and no water intrusion is stopped, the vessel will be prepped for towing to a shipyard in San Diego, California.
Pilgrim (replica) , 118’ overall length, wood hull, wood keel.
Date of Proposed lift: April 2, 2020
0730 Divers will rig the Pilgrim for the first pick.
Slings will be attached from the drive shaft up the starboard and port sides.
Use of approximately 50% lift bags (already in place) and 50% crane lift.
Additional small lifts will follow if required.
Each lift will be monitored aboard DB Salta Verde to the pull load.
Initial lift will peak at 5-6,000 lbs.
The initial pick will happen at around noon during low tide.
Next Steps For Salvaging the Pilgrim
Sunday April 5 2020: Take Masts off the Pilgrim. Clean up. Pulling the boat out of the slip.
Friday April 3 2020: Pilgrim Lift
Thursday April 2 2020: Pilgrim Lift Preparation with a Barge from Curtain Maritime with a Crane on board worked with Divers to prepare the vessel to be lifted from the water.
Monday March 30 2020: Lift Boat out of Water & Stabilize it and its contents
In Near Future: Assessment of Pilgrim and Evaluation of How Pilgrim Capsized
The Ocean Institute stated on March 31 2020, “Thank you for sending your pictures, stories, and memories. The outpouring has been heartwarming and we will use the energy and support to write the next chapter.”
If you want to help the Ocean Institute, you can donate to their General Fund.
Ocean Institute General Operations Giving Fund Is Online